Tabs, Base Plates and Hardware
King No.16
Dimension: 3 1/8" x 2" x 1/8"
Weight: 0.12 lbs | Base: 1" | Hole: 3/8"
Steel
King No.17
Dimension: 2 5/8" x 2" x 1/8"
Weight: 0.09 lbs | Base: 1"
Hole: 3/8" | Steel
King No.18
Available in: 3", 4", 5", 6", 8", 10"
Also available in Zinc
King No.20
Dimension: 3 5/16" x 2 13/16" x 1/2"
Weight: 0.16 lbs
Hole: 3/8" | Steel
King No.21
Dimension: 2 7/8" x 2 5/8" x 1"
Weight: 0.13 lbs
Hole: 3/8" | Steel
King No. 23 Camelback Hinge
- External rust-free camelback hinge
- Made of galvanized steel
- Can be fastened tight or accommodates a #1 or #2 grommet, eliminating the need to stock 2 hinges
King No. 24-3/4" & No. 25-1"
- 1" stainless steel
- External eye end
King No. 27-3/4"
- 3/4" single swivel pulley
- Nickle plated steel
King No. 27A-3/4"
- 3/4" double swivel pulley
- Nickle plated steel
King No. 29-1035
- Molding clip
- Aluminum clip is secured to the head rod molding using a stainless steel carriage bolt, washer and nut - Holds head of awning in place by tucking hem of fabric with   1/2" head rod inside under the rainproof lip of molding
- Rust free
King No. 30-110S & No. 30L-111S
- Tie-down clamp
- Galvanized Steel carriage bolt and hex
- Prevents water from pooling behind the front bar when awning is laced to the 3/8" or 1/2" rod - 30L-1" longer for better pull on the front of the awning
- Rust free
King No. 31-102S
Pipe clamp
- Stamp steel design for 1" pipe and is hot dipped galvanized
- Comes with stainless carriage bolt and nut
- Rust free
King No. 32-101S
- Jaw End
- Aluminum extrusion outfitted with stainless steel
- Slides into head rod molding for easy spacing of rafters
- Rust free
King No. 33-112S
- Corner Elbow 1"
- Adjustable fit design for 1" pipe
- Galvanized malleable iron
- Corner elbow joins the end rafter to front bar enabling a smooth fit for the corner fabric
- Rust free
King No. 34-105S & No. 34S-345S
- Adjustable front bar fitting
- Galvanized stamped steel attached to a zinc die cast collar for 1" and 3/4" front bar and rafter
- Stainless steel carriage bolt and hex nut
- Rust free
King No. 35-107S
- Adjustable 1" post socket
- Galvanized malleable steel
- Used to attach uprights as well as projection side bars
- Produces a stronger and vibration free point of attachment
- Rust free
King No. 36-104S
- Single hole head rod clamp 1/2"
- Zinc die cast base and clamp
- Stainless steel bolt and wing nut
- Rust free
King No. 37-109S
- Rod & rafter holder
- Used with 1/4" to 1/2" head rod
- Hot dipped galvanized finish with
stainless steel wing nut and bolt
- Rust free
website designed and maintained by Vikas Sharma
KING INDUSTRIAL PRODUCTS INC
Tel - 818 222 2133 | Fax - 818 222 2366
Download Product Brochure